Are you familiar with that feeling when a computer crashes while you’re in the middle of a very urgent or important task? Sucks, right?

We all dread those moments when a computer issue pops up, and we can’t tell what it means or how to solve it. But what if you knew what the problem was and how you could fix it?

Therefore, before you start panicking about your faulty PC, here are some of the common computer problems and how to fix them.

Faulty Fan

If there’s a lot of dirt and dust inside the PC, some fans can stop working. In some cases, the fan runs as usual but doesn’t adequately cool down the computer. Thus, open your PC then use a leaf blower on the lowest setting or compressed air can to clean the fan.

If the fan isn’t working even after cleaning, you can use Speed Fan to diagnose and fix the problem, that is, if your PC supports fan control.

Overheating

Overheating occurs when the cooling system is ineffective or the computer is heating to a point beyond the cooling system’s capabilities. Overheating can slow down the whole system leading to constant crashes.

The constant heat exposure can also lead to the PC component’s damage. Therefore, shut down your PC and let it cool down before using it again. If this doesn’t solve the problem, you should see a specialist for repairs.

Constant Beeping

PC beeping can be a sign of many problems, especially if it doesn’t start after the beep. If it beeps two to three times and refuses to boot, then the RAM is loose or out of place. Reinsert the RAM properly, and it will be ok.

The beep can also be due to the wrong installation of hardware. Taking out any recently installed hardware can solve the problem. If the PC is fine after removing the hardware, then you need to fix the hardware or install it properly.

If you aren’t a computer expert yourself, don’t try removing and inserting hardware as you can cause damage. Check out this post to learn the common mistakes with fixing your own computer and why you should consult a repairs expert.

PC Not Powering On

A power source problem can make the PC to stop working. Take out your laptop’s battery, place it back then power on the laptop.

Still not functioning? Remove your battery again and connect your laptop to the charging cable and turn on the PC. If the problem gets fixed, you have to replace the battery.

If you use a desktop computer, try using a different power cable and power the PC. Should it come on, your old cable is faulty and should be replaced.

Blank Monitor

A problem with the graphics card or an issue with the monitor can lead to a blank screen. Try connecting your computer to another display using an audio/video interface such as an HDMI cable to determine if it’s a PC or a monitor issue.

If you get a display using the cable Java vs Ruby , your monitor is faulty. If the screen remains blank, the PC could be faulty.

Unable to Resolve Computer Problems?

Computer problems can stress you out, especially if you’re unable to locate the issue. In most cases, unless you’re an expert, you may not be able to identify and resolve most issues with computer hardware.

Consult an expert for PC repair services. You not only save time but also protect your PC from damage from DIY repairs.

Author

I am Web and Tech blogger from India. I love to explore new things via traveling or surfing on Internet.

Write A Comment

Share This